Recall · 20V023000
Terex Advance Mixer recalled 4 models over power train
34
Vehicles covered
4
Models
4
Model years
January 17, 2020
Filed with NHTSA
POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT
- The defect
- Terex Advance Mixer (Terex) is recalling certain 2020 FDC300, FD4000, FD5000GL, and FD7000B vehicles. The axle output shafts were incorrectly heat treated, possibly causing them to fracture.
- What it can cause
- The fracturing of the output shaft would result in a loss of drive, increasing the risk of a crash.
- What the dealer does
- Terex has notified owners. Owners should inspect the Dana output flange for its production date. Dana will replace any that are in the affected range, free of charge. The recall began January 24, 2020. Owners may contact Terex customer service at 1-800-678-5961.
- NHTSA's note
- Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. NHTSA is missing critical, required information for this safety recall. This information must be supplied through the NHTSA Recalls Portal within 5 working days of confirming its accuracy: - A statement that the defect or noncompliance can cause a vehicle crash without prior warning; or a description of whatever prior warning may occur, and a statement that if this warning is not heeded, a vehicle crash can occur (49 CFR 577.5 (f)(1)).
The repair is free, whatever the age or mileage of the vehicle, and whether or not you are the original owner.
Which vehicles
A recall reaches a range of VINs inside these model years, not every car built in them. Yours may not be covered even if it is listed here, and the only way to find out is NHTSA's own VIN lookup .
| Vehicle | Model years | Safety record |
|---|---|---|
| Terex AdvanceFD4000 | 2020 | Not published here |
| Terex AdvanceFD5000GL | 2020 | Not published here |
| Terex AdvanceFD7000B | 2020 | Not published here |
| Terex AdvanceFDC300 | 2020 | Not published here |
How this campaign compares
At 34 vehicles this is a small campaign: 82% of the 19,818 vehicle recalls filed since 1995 whose size NHTSA published are as large or larger. The middle campaign on file covers 472. It covers one model year, 2020, and the defect was reported to NHTSA in 2020, at or before the oldest model year it covers — as current as a recall gets.
Terex Advance vehicles have been recalled over the power train once before this, most recently in May 2016 as 16V371000. That is not evidence the earlier repair failed.
Check your own car
A VIN check is the only answer for a specific vehicle, and it also shows every other open recall on it, which is usually the reason it is worth doing rather than reading one campaign.
Filed by Terex Advance Mixer, Inc. with NHTSA on January 17, 2020 as campaign 20V023000. Every word of the defect, consequence and remedy above is NHTSA's published record of that filing, not a summary of it.
Compiled and maintained by guarledes . Data last checked 2020-01-17.
Independent developer and analyst